Browse
Categories

Changing an Open Polyline to a Closed Polyline

Reference Number: KB-00171 Last Updated: 12-23-2014 12:36 PM

The information in this article applies to:

Chief Architect Premier or Chief Architect Interiors


QUESTION

I created a polyline using the Draw Line and Draw Arc tools, but cannot get the edges that I drew to connect for a single object. Instead, the individual lines and arcs can only be selected separately. What am I doing wrong?


ANSWER

Individual ­CAD lines and arcs can be snapped together end-to-end to form a polyline, but only when Endpoint Object Snaps are turned on and Edit Object Parts is turned off.


To turn on Endpoint Object Snaps and turn off Edit Object Parts

  1. Select Edit> Snap Settings from the menu and make sure that Object Snaps  - and particularly, Endpoint  snaps - are enabled.


  2. Find Edit> Edit Behaviors> Edit Object Parts  from the menu. Make sure that Edit Object Parts does not have a check mark next to it. 


  3. You can also toggle Edit Object Parts on and off on the CAD panel of the Preferences dialog:

    • Select Edit> Preferences  from the menu if you're on a Windows PC or Chief Architect> Preferences  if you're on a Mac and select CAD from the list of categories on the left.

    • Uncheck the box beside Edit Object Parts.

    • Click OK to close the dialog and apply your change.