Creating HVAC and Plumbing Runs
| Reference Number: KB-00934 Last Updated: 06-09-2015 06:37 AM
The information in this article applies to:
I need to show the location and routing of my Plumbing and HVAC lines in my plan.
You can use the special line styles and custom layers in Chief Architect to draw your HVAC and Plumbing plans.
In this example, we have HVAC, Plumbing and Gas lines in the plan, so we will create 3 new layers--"MEP, Plumbing", "MEP, GAS" and "MEP, HVAC".
To create new layers
Select Tools> Layer Settings> Display Settings
to open the Layer Display Options
Click the New button at the bottom left corner of the dialog.
In the New Layer Name dialog, type the name for your new layer.
When you click OK, you are returned to the Layer Display Options dialog and the new layer's name is highlighted.
Under Properties for "MEP, HVAC" click on the Color box and select the color you want for these lines. Then click on the drop down arrow for the Line Style and select the line style you want to use.
Repeat this for each of the new layers you create and click OK
to return to your plan.
To draw gas, HVAC, and plumbing lines
When you are ready to place lines for your HVAC, gas, or plumbing routing, you can place these lines on your custom layers. There are several ways to do this.
- Use the CAD Drawing tools to create CAD lines, arcs, polylines and/or splines as needed. Once they are drawn, place them on the desired layer.
- Specify a selected object's layer on the Line Style panel of its specification dialog.
- Use the Layer Painter tool, select a layer and then click on items to assign them to that layer.
- Specify one of your new custom layers as the Current CAD Layer, and then use the CAD drawing tools to create lines, arcs, etc that are placed your custom layer and inherit its attributes.
- Select CAD> Current CAD Layer from the menu.
- In Chief Architect X3 and newer, the most efficient way for users who routinely need HVAC, plumbing, or other mechanical schematics is to create a custom Annotation Set for each type of drawing, and specify the appropriate Current CAD Layer for each.
To learn more about setting up a custom Annotation Set, refer to the Related Articles section at the bottom of this page.
To draw using multiple line styles
Some drawing tasks require multiple line styles. For example, plumbing layouts typically distinguish between Cold Water, Hot Water and Waste Water lines.
There are a number of ways to achieve this.
- Create custom layers for each of the line styles that you will need, then either place CAD objects on the appropriate layers after they are drawn or change the Current CAD Layer as you work.
- Use the CAD Drawing tools to create CAD lines, arcs, polylines and/or splines as needed. Once they are drawn, change their line style on the Line Style panel of their specification dialog.
- Open the Library Browser and expand the Line Styles folder so you can see its contents in the tree list. When you need a particular line style, select it in the Library Browser, move your pointer into the drawing area, then click and drag to draw a CAD line using the selected line style.