Browse
Categories

Creating a Hole in a Slab

Reference Number: KB-00980 Last Updated: 07-03-2014 07:39 AM

The information in this article applies to:

Chief Architect Premier or Chief Architect Lite


QUESTION

When trying to draw a ­Slab Hole, an Information message tells me,

"A slab hole must be placed inside a slab."

What exactly does this mean?



ANSWER

By definition, a hole in an object such as a slab must be completely contained within that object. The hole cannot touch the edge of the object, extend past the edge of the object, or be contained by multiple objects.

 

To draw a slab hole

  1. Select Build> Slab> Slab  or Slab with Footing  from the menu, then click and drag to draw a rectangular slab.





  2. Click on the slab to select it and edit its size and shape as needed.


  3. Select Build> Slab> Slab Hole  from the menu, then click and drag to draw a small rectangular slab hole entirely within the existing slab.




    • Slab Holes  can be drawn within either a Slab or a Slab with ­Footing.

    • Slab Holes with Footings  can only be drawn within a Slab with Footing


  4. Once drawn slab holes can be edited much like slabs can. The only restriction is that they must be contained entirely within one individual slab object.


  5. You can see the results in a Camera  view.




If you need to create a cutout in the slab's perimeter rather than add a hole to its interior, you can add breaks to its edges.



To add edges to a slab's shape

  1. Click on the slab to select it, then click the Break Line  edit button.


  2. Click on an edge of the slab where you would like to add a corner.




    • When you click, a new diamond-shaped Reshape edit handle is created.

    • Don't worry about placing the new corner with precision - the shape can be edited accurately later.


  3. Click and drag the square Move Line Segment edit handle to move the edge on either side of the new corner.




    • The new edge can also be moved using dimensions.

    • You can also click and drag the Reshape edit handle at the new corner to change its location and the angles of the adjacent edges.