Browse
Categories

Creating an Appliance Garage in a Cabinet

Reference Number: KB-02072 Last Updated: 12-11-2014 10:14 AM

The information in this article applies to:

Chief Architect Premier or Chief Architect Interiors or Chief Architect Lite

QUESTION

I need to place a vertical sliding tambour door in my cabinet. Is there a way to do this in Chief Architect?

 


ANSWER

You can change the door style of any cabinet using a selection of pre-made doors in the Chief Architect Library.

In this article, you will learn how to add a bread door, also known as a tambour door, to a wall cabinet using a door style from the Chief Architect Core Catalog.

To design the cabinet

  1. Start by adding a wall cabinet to your plan by going to Build> Cabinet> Wall Cabinet .

    If you move your cursor into a corner, notice the preview updates so that you will automatically place a corner cabinet, as demonstrated in this example. 


  2. Select the Wall Cabinet and click the Open Object edit tool.


  3. On the Front panel of the Wall Cabinet Specification dialog, click the Add New button.


  4. In the New Cabinet Face Item dialog, select Door Panel as the Item Type, set the Item Height, and then hit OK.



    • In this example, 17-5/8" was used.


  5. Now, select the bottom item of the cabinet in the preview or choose Item Number 6, which should be a Separation, then click Delete to remove it.




  6. Select the Door Panel in the Item Type drop down menu or go to Item Number 5, and click the Library button next to Appliance/Door/Drawer to display the Select Library Object dialog.



    • Navigate to Chief Architect Core Catalogs> Architectural> Cabinet Doors, Drawers, & Panels> Specialty Storage, choose Appliance Garage, and hit OK

  7. Make any other needed modifications and then hit OK on the Wall Cabinet Specification when you are done.

Now your cabinet should have a tambour style door that opens upwards from the bottom.