Creating a Deck Around an Above-ground Pool or Spa
| Reference Number: KB-00852 Last Updated: 12-10-2013 11:08 AM
The information in this article applies to:
My clients need a deck built around their existing above-ground pool. How can I design it for them in Chief?
You can easily drop a pool or spa into a deck by specifying part of the deck room as "Open Below".
To drop a pool into a deck platform
- Open the plan in which you would like to position a pool or spa in a deck platform.
- If you have not done so already, select Library> Library Browser from the menu, then select an above ground pool to place in your plan. Move your cursor into the drawing area and click to place the pool at that location.
- A selection of pools and related objects can be found in the Pools, Spas & Waterfront library as well as in the Bonus Pools library.
- In this example, Exteriors> Recreation> Pools, Spas, & Waterfront> Pools> Oval Pools> Oval Above Ground Pool - Large is used.
- Click the Select Objects button, then click on the pool to select it and click the Open Object edit button. On the General tab of the Fixture Specification dialog:
- Specify the size of the actual pool used in your project.
- Make a note of the pool's Height value and click OK.
- Select Build> Decks> Straight Deck Railing from the menu, then click and drag to draw deck railings around the pool, creating a Deck room.
- Click the Select Objects button, then click on the deck railings and move them as needed to create a deck of the desired size and position.
- Build> Wall> Room Divider from the menu, then click and drag to draw a second room entirely inside the first one. Trace along the edges of your pool.
- If your pool is round or has rounded edges, you can instead use the Curved Deck Edge tool and then make your railing walls invisible.
- To learn how to create a perfectly round room, see the Related Articles section at the bottom of this article.
- Using the edit handles, position the deck edges so that they align with the outside edges of the pool symbol.
- Starting in Chief Architect X4, an invisible wall or room divider is automatically drawn any time you draw a room inside of another room. This is to avoid an issue with creating open below rooms inside of other rooms.
If you are using Chief Architect X3, be sure and manually draw an
invisible wall from your interior deck room to the exterior wall of your
deck. This step is very important. If you do not connect the deck
edges to the outer railing, the deck platform will continue through the
open area. For more information please visit the article on 'Using Open Below Rooms in X3 and Prior' linked at the bottom of this article.
- Click the Select Objects button, then click in an empty space in the larger rectangular deck room to select the deck room and click the Open Object edit button.
- On the Structure
Panel of the Room Specification dialog, specify the Floor as the same or slightly less than the pool's Height value, then click OK.
In Chief Architect X2 and prior, the Floor Height value was located on the General tab of the Room Specification dialog.
- In this example, the pool's Height is 55 7/8", and the Floor height for the deck is specified as 50".
- With the Select Objects tool still selected, click in the new Deck room, that encompasses the pool, to select it and click the Open Object edit button.
- It is likely that you will select the pool instead of the room. Click the Select Next Object edit button or press the Tab
key until the room is selected.
- On the General panel of the Room Specification dialog, select Open Below from the Room Type drop-down list.
- On the Structure panel, uncheck Roof Over This Room.
- Click OK to close the dialog and apply your changes.
- Select 3D> Create Perspective View> Full Overview from the menu to see the results.
In Chief Architect X1 and prior, use 3D> Create Render View> Render Full Overview.