Chief Architect can easily create vaulted or cathedral ceilings.
Video No. 28
By default, cathedrals ceiling use the ceiling material set in the Room Specification dialog.
Video No. 307
A cathedral ceiling has the same pitch as the roof and is created using the underside of the roof above the room.
Video No. 308
A vaulted ceiling typically has a different pitch from that of the roof.
Video No. 309
A tray ceiling is flat in the center and sloped around the perimeter.
Video No. 310
You can create a dropped, or suspended, ceiling by specifying its structure in the Ceiling Finish Definition dialog either for a room or the defaults for a floor.
Video No. 311
Use a combination of tools to create a coffered ceiling with a recessed backlit panel.
Video No. 312
Create multiple sunken panels in your ceiling using Molding Polylines and Polyline Solids.
Video No. 313
Control whether soffits against a wall will inherit the rooms moldings.
Video No. 5321
Learn the basics of the custom ceiling tool in this brief introduction
Video No. 10127
We will cover how to modify your ceiling design to a Slat, Shed, and Vault.
Video No. 1935
You can easily customize your ceiling into a unique coffered ceiling using molding polylines.
Video No. 1936
If you are an interior designer, draw the ceiling plane to the finish layer of the wall inside the room. If you are framing the walls, roof or ceiling, the location of the custom ceiling planes is a function of how you want to do the framing.
Video No. 10149